: 0 ItemsGobe Xilinx XC9500XL CPLD Development Board
Develop on the Cutting Edge of Technology with the Xilinx XC9500XL CPLD
|
Forget the fluff, the Gobe XC9500XL CPLD Development board is a simple CPLD, with an over 85% efficient power regulator, a 48MHz 50ppm Oscillator, and access to 32 IO pins. The 2, 2mm headers give access to IO pins, input power, and +3.3V output. This development board is perfect to provide glue-logic to small applications, or to learn a HDL like VHDL or Verilog. The Gobe board is perfect for developing circuits where the non-volatile logic from that of a CPLD is the best fit. The Gobe board is meant for small projects and applications where a relatively simple logic solution is desired. The on-board 48MHz oscillator can be manipulated in logic to generate your desired clock frequency for logic or control. For requirements on specific examples see the block diagram below. |
Price: $19.99 |
Applications
- I2C EEPROM Controller
- Keypad Scanner Interface
- LCD Interface
- LED Test
- Serial or parallel ADC Interface
- Serial or parallel DAC Interface
- Data Stream switch
- Motor Controller
- PWM
- Bit Stream Encoder/Decoder
Functional Block Diagram
Gobe Device Pinout
- Pinout (MS Excel .xls) file depicting the mapping between each connector pin and the corresponding CPLD IO Pin
Programming in VHDL or Verilog
One of the key advantages to CPLD's is non-volatile nature of the logic, which is ready on power-up as opposed to an FPGA which must configure it's logic from an external source. The Gobe board can be programmed using the Xilinx ISE tool iMPACT TM, with any 6-Pin Female Programming JTAG cable. As with all Xilinx products the GOBE CPLD Development board can be programmed in VHDL or Verilog.
Shipping
- Shipping within the United states UPS or customer acct #
- International shipping from USPS
- Shipping options are chosen through Paypal
For any other questions or inquiries please contact us.