• Cart : 0 Items
• Home
• |
• Products
• |
• FAQ
• |
• USB Software Resources
• |
• Getting Started

SerMod-100 EZ-USB FX2 USB Board

Need to start developing a USB Solution that requires a microcontroller with plenty of features?

The SerMod-100 USB Board gives full development capability of the EZ-USB FX2 100-pin package. For USB applications that require not just I/O through the USB bus, but access to I2C, USARTs, timers, and/or additional port I/O than the SerMod-56 USB Board or the Pike USB Board, the SerMod-100 USB Board is a great solution. This USB Board provides access to all functions of the EZ-USB FX2, and can function at high-speed (480Mbit/s) or full-speed (12Mbit/s) data rates. Power is provided from the USB Bus, and if you decide to power another circuit that drains more current than the USB Bus can provide (500mA) a power plug is provided on-board. This board is great to learn USB programming, bit-bang the many ports, or perform any other numerous applications the USB peripherals provide. Be sure to take a look at our Getting Started and USB Software Resources pages to help get you started quickly.

Price: $36.99 In stock, please contact for quantities of 10 or more

Features

• Cypress EZ-USB FX2-LP 8051 Microcontroller based USB Transceiver
• USB 2.0 High Speed Interface 480Mbit/s
• Low power for USB Bus powered Applications (FX2-LP)
• Powered from the USB Cable
• Onboard +3.3V Low Drop Out Voltage Regulator or through the Power Connector
• Onboard EEPROM 32kB I2C 100/400kHz and Access to the I2C Bus
• Five I/O Ports: PORTA, PORTB, PORTC, PORTD, and PORTE
• Firmware quickly downloaded through USB
• Form Factor 57x53mm or 2.35x2.1in
• Four Slave FIFOs (8 or 16-bit) with control signals multiplexed with PORTA
• Functionality to interface Slave FIFOs with ATAPI, UTOPIA, EPP, or any general interface.
• All FX2 pins map through four 0.1" Headers
• Two (2) USARTs, Three (3) Timer inputs, Two (2) external interrupt pins
• RD# and WR signals that can be used as read and write strobes through PORTC
• Seven (7) Additional Control and Ready signals for the General Programmable Interface (GPIF) to the Slave FIFOs
• Functionality to interface Slave FIFOs with ATAPI, UTOPIA, EPP, or any interface in general (programmable).
• Compatible as Full Speed device (12Mbit/s)

Functional Block Diagram

SerMod-100 USB Board Device Pinout

• SerMod-100 USB Board Pinout (.pdf) file depicting the mapping between each connector pin and the corresponding EZ-USB FX2 I/O Pin

What's Included

• SerMod-100 USB Circuit Board Assembly
• 2 2x15 0.1" Headers, 2 2x10 0.1" Header, and 1 2 pin ground header (If you want them soldered on please specify top or bottom in the order)
• A CD with datasheets, pinouts, schematics and links to our Getting Started and USB Software pages.

Shipping

• Usually Ships next day
• Shipping within the United states via UPS
• International shipping from USPS
• Shipping options are chosen through Paypal